ULTRACRETE-MT1000 is a single bag formula dry mix requiring ONLY THE ADDITION OF WATER to produce a permanent bonding micro topping for thin concrete overlay and resurfacing.
ULTRACRETE-MT1000 requires no bond coat and can be installed from feather finish to 1/8” using a variety of application tools such as hand trowels, magic trowels or spraying equipment on properly prepared non-flexible horizontal or vertical surfaces. UltraCrete-MT1000 is suitable for exterior and interior surfaces from vehicle traffic surfaces to floors and countertops.
Approximately 150-250 square feet per 40 lb. bag. Coverage will depend on application method and thickness as well as surface condition.
Apply only to a clean and sound substrate free of any prior coating materials. Pressure washing with a 3500 PSI washer is recommended. Mix UltraCrete-MT1000 in a clean five gallon bucket using a mortar mixing paddle with a 1⁄2-inch drill. Add cool clean potable water at a rate of 4 to 5.5 quarts per 40 lb. bag to a pancake batter consistency. Increase or decrease the amount of water to achieve the desired consistency for your specific application method and environment. DO NOT ADD TOO MUCH WATER. Test on an inconspicuous area to be sure UltraCrete-MT1000 is suitable for your application.